BTCML - H 251 THINNER
- MSDS: BTCML
- Manufacturer: SARAN PROTECTIVE COATINGS CO
- Product Name: H 251 THINNER
- National Stock Number: 8010-00-831-5935
Product Identification
Product ID:H 251 THINNER
MSDS Date:02/16/1989
FSC:8010
NIIN:00-831-5935
MSDS Number: BTCML
Responsible Party
DETROIT, MI 48212
US
Emergency Phone: 313-368-4900
Info Phone: 313-368-4900
Cage: 11931
Contractor
Cage: 11931
Ingredients
CELLOSOLVE ACETATE
CAS: 111-15-9
RTECS: KK8225000
Fraction By Weight: 50%
ACGIH TLV: 50 PPM
XYLENE (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 25%
ACGIH TLV: 100 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 25%
ACGIH TLV: 100 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
7.66 LBS/GAL
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Effects of Overexposure:EYES: SEVERE IRRITATION, REDNESS, AND TEARING.
SKIN: MODERATE IRRITATION, DEFATTING AND DERMATITIS. INHALATION:
DIZZINESS, WEAKNESS, NAUSEA, AND HEADACHE. INGESTION: NAUSEA,
VOMITING, AND DIARRHEA.
Medical Cond Aggravated by Exposure:NONE KNOWN
First Aid
First Aid:INHALATION: ADMINISTER OXYGEN OR ARTIFICIAL RESPIRATION AS
NEEDED. OBTAIN MEDICAL ATTENTION. EYES: FLUSH WITH CLEAN, LUKEWARM
WATER FOR AT LEAST 15 MINUTES. OBTAIN MEDICAL ATTENTION. SKIN: WASH
AFFECT ED AREAS THOROUGHLY WITH SOAP AND WATER. INGESTION: DO NOT
INDUCE VOMITING. CONSULT A PHYSICIAN.
Fire Fighting
Flash Point Method:TCC
Flash Point:83.0F,28.3C
Autoignition Temp:Autoignition Temp Text:447F
Lower Limits:1.2
Upper Limits:7.1
Extinguishing Media:WATER, CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:FULL EMERGENCY EQUIPMENT WITH SELF-CONTAINED
BREATHING APPARATUS AND FULL PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:CLOSED CONTAINER MAY EXPLODE WHEN EXPOSED
TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:MATERIAL IS HYGROSCOPIC, CONTAINERS SHOULD BE
TIGHTLY SEALED TO PREVENT CONTAMINATION. VENTILATE THE AREA. COVER
SPILL WITH ABSORBENT MATERIAL. COLLECT IN OPEN CONTAINERS.
Exposure Controls
Respiratory Protection:COMBINATION ORGANIC VAPOR AND PARTICULATE
RESPIRATOR. OSHA (29 CFR 1910.134) RESPIRATOR USE.
Ventilation:LOCAL EXHAUST: TO MAINTAIN TLV BELOW ALLOWABLE LIMITS.
Protective Gloves:CHEMICAL RESISTANT GLOVES
Eye Protection:SPLASH GOGGLES OR FACE SHIELDS
Other Protective Equipment:IN AN AREA OF LIMITED VENTILATION, A
POSITIVE PRESSURE AIR RESPIRATOR IS MANDATORY.
Work Hygienic Practices:SAFETY SHOWERS AND EYEWASH STATIONS SHOULD BE
AVAILABLE. DO NOT WEAR CONTACTS.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:200F,93C
Melt/Freeze Pt:M.P/F.P Text:LIQUID
Vapor Pres:25 @ 20C
Vapor Density:>1
Spec Gravity:0.92 (WATER=1)
Solubility in Water:SLIGHTLY
Appearance and Odor:CLEAR LIQUID WITH FRUITY ESTER LIKE ODOR
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
DO NOT MIX WITH PHOSPHORUS CONTAINING MATERIALS
Stability Condition to Avoid:MOISTURE
Hazardous Decomposition Products:BY FIRE - CARBON DIOXIDE, CARBON
MONOXIDE, AND VARIOUS OTHER HYDROCARBONS.
Conditions to Avoid Polymerization:MOISTURE (MATERIAL IS HYGROSCOPIC)
Disposal
Waste Disposal Methods:CONSULT FEDERAL, STATE, AND LOCAL REGULATIONS.
INCINERATION IS PREFERRED METHOD.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.